ANNEX 14 — VOLUME I
6-1
25/11/04
CHAPTER 6.
VISUAL AIDS FOR DENOTING OBSTACLES
6.1
Objects to be marked
and/or lighted
Note.— The marking and/or lighting of obstacles is
intended to reduce hazards to aircraft by indicating the
presence of the obstacles. It does not necessarily reduce
operating limitations which may be imposed by an obstacle.
6.1.1
Recommendation.— A fixed obstacle that extends
above a take-off climb surface within 3 000 m of the inner
edge of the take-off climb surface should be marked and, if the
runway is used at night, lighted, except that:
a) such marking and lighting may be omitted when the
obstacle is shielded by another fixed obstacle;
b) the marking may be omitted when the obstacle is lighted
by medium-intensity obstacle lights, Type A, by day and
its height above the level of the surrounding ground
does not exceed 150 m;
c) the marking may be omitted when the obstacle is lighted
by high-intensity obstacle lights by day; and
d) the lighting may be omitted where the obstacle is a
lighthouse and an aeronautical study indicates the
lighthouse light to be sufficient.
6.1.2
Recommendation.— A fixed object, other than an
obstacle, adjacent to a take-off climb surface should be
marked and, if the runway is used at night, lighted if such
marking and lighting is considered necessary to ensure its
avoidance, except that the marking may be omitted when:
a) the object is lighted by medium-intensity obstacle lights,
Type A, by day and its height above the level of the
surrounding ground does not exceed 150 m; or
b) the object is lighted by high-intensity obstacle lights by
day.
6.1.3
A fixed obstacle that extends above an approach or
transitional surface within 3 000 m of the inner edge of the
approach surface shall be marked and, if the runway is used at
night, lighted, except that:
a) such marking and lighting may be omitted when the
obstacle is shielded by another fixed obstacle;
b) the marking may be omitted when the obstacle is lighted
by medium-intensity obstacle lights, Type A, by day and
its height above the level of the surrounding ground
does not exceed 150 m;
c) the marking may be omitted when the obstacle is lighted
by high-intensity obstacle lights by day; and
d) the lighting may be omitted where the obstacle is a
lighthouse and an aeronautical study indicates the
lighthouse light to be sufficient.
6.1.4
Recommendation.— A fixed obstacle above a
horizontal surface should be marked and, if the aerodrome is
used at night, lighted except that:
a) such marking and lighting may be omitted when:
1) the obstacle is shielded by another fixed obstacle; or
2) for a circuit extensively obstructed by immovable
objects or terrain, procedures have been established
to ensure safe vertical clearance below prescribed
flight paths; or
3) an aeronautical study shows the obstacle not to be of
operational significance;
b) the marking may be omitted when the obstacle is lighted
by medium-intensity obstacle lights, Type A, by day and
its height above the level of the surrounding ground
does not exceed 150 m;
c) the marking may be omitted when the obstacle is lighted
by high-intensity obstacle lights by day; and
d) the lighting may be omitted where the obstacle is a
lighthouse and an aeronautical study indicates the
lighthouse light to be sufficient.
6.1.5
A fixed object that extends above an obstacle
protection surface shall be marked and, if the runway is used
at night, lighted.
Note.— See 5.3.5 for information on the obstacle protection
surface.
Annex 14 — Aerodromes
Volume I
25/11/04
6-2
6.1.6
Vehicles and other mobile objects, excluding
aircraft, on the movement area of an aerodrome are obstacles
and shall be marked and, if the vehicles and aerodrome are
used at night or in conditions of low visibility, lighted, except
that aircraft servicing equipment and vehicles used only on
aprons may be exempt.
6.1.7
Elevated aeronautical ground lights within the
movement area shall be marked so as to be conspicuous by
day. Obstacle lights shall not be installed on elevated ground
lights or signs in the movement area.
6.1.8
All obstacles within the distance specified in
Table 3-1, column 11 or 12, from the centre line of a taxiway,
an apron taxiway or aircraft stand taxilane shall be marked
and, if the taxiway, apron taxiway or aircraft stand taxilane is
used at night, lighted.
6.1.9
Recommendation.— Obstacles in accordance with
4.3.2 should be marked and lighted, except that the marking
may be omitted when the obstacle is lighted by high-intensity
obstacle lights by day.
6.1.10
Recommendation.— Overhead wires, cables, etc.,
crossing a river, valley or highway should be marked and their
supporting towers marked and lighted if an aeronautical study
indicates that the wires or cables could constitute a hazard to
aircraft, except that the marking of the supporting towers may
be omitted when they are lighted by high-intensity obstacle
lights by day.
6.1.11
Recommendation.— When it has been deter-
mined that an overhead wire, cable, etc., needs to be marked
but it is not practicable to install markers on the wire, cable,
etc., then high-intensity obstacle lights, Type B, should be
provided on their supporting towers.
6.2
Marking of objects
General
6.2.1
All fixed objects to be marked shall, whenever
practicable, be coloured, but if this is not practicable, markers
or flags shall be displayed on or above them, except that
objects that are sufficiently conspicuous by their shape, size or
colour need not be otherwise marked.
6.2.2
All mobile objects to be marked shall be coloured or
display flags.
Use of colours
6.2.3
Recommendation.— An object should be coloured
to show a chequered pattern if it has essentially unbroken
surfaces and its projection on any vertical plane equals or
exceeds 4.5 m in both dimensions. The pattern should consist
of rectangles of not less than 1.5 m and not more than 3 m on
a side, the corners being of the darker colour. The colours of
the pattern should contrast each with the other and with the
background against which they will be seen. Orange and white
or alternatively red and white should be used, except where
such colours merge with the background. (See Figure 6-1.)
6.2.4
Recommendation.— An object should be coloured
to show alternating contrasting bands if:
a) it has essentially unbroken surfaces and has one
dimension, horizontal or vertical, greater than 1.5 m, and
the other dimension, horizontal or vertical, less than
4.5 m; or
Figure 6-1.
Basic marking patterns
White
Orange or red
>4.5 m
>4.5 m
>1.5 m
>1.5 m
<4.5 m
<4.5 m
Chapter 6
Annex 14 — Aerodromes
6-3
25/11/04
b) it is of skeletal type with either a vertical or a horizontal
dimension greater than 1.5 m.
The bands should be perpendicular to the longest dimension
and have a width approximately 1/7 of the longest dimension
or 30 m, whichever is less. The colours of the bands should
contrast with the background against which they will be seen.
Orange and white should be used, except where such colours
are not conspicuous when viewed against the background. The
bands on the extremities of the object should be of the darker
colour. (See Figures 6-1 and 6-2.)
Note.— Table 6-1 shows a formula for determining band
widths and for having an odd number of bands, thus
permitting both the top and bottom bands to be of the darker
colour.
6.2.5
Recommendation.— An object should be coloured
in a single conspicuous colour if its projection on any vertical
plane has both dimensions less than 1.5 m. Orange or red
should be used, except where such colours merge with the
background.
Note.— Against some backgrounds it may be found necess-
ary to use a different colour from orange or red to obtain
sufficient contrast.
6.2.6
Recommendation.— When mobile objects are
marked by colour, a single conspicuous colour, preferably red
or yellowish green for emergency vehicles and yellow for
service vehicles should be used.
Table 6-1.
Marking band widths
Use of markers
6.2.7
Markers displayed on or adjacent to objects shall be
located in conspicuous positions so as to retain the general
definition of the object and shall be recognizable in clear
weather from a distance of at least 1 000 m for an object to be
viewed from the air and 300 m for an object to be viewed from
the ground in all directions in which an aircraft is likely to
approach the object. The shape of markers shall be distinctive
to the extent necessary to ensure that they are not mistaken for
markers employed to convey other information, and they shall
be such that the hazard presented by the object they mark is
not increased.
6.2.8
Recommendation.— A marker displayed on an
overhead wire, cable, etc., should be spherical and have a
diameter of not less than 60 cm.
6.2.9
Recommendation.— The spacing between two
consecutive markers or between a marker and a supporting
tower should be appropriate to the diameter of the marker, but
in no case should the spacing exceed:
a) 30 m where the marker diameter is 60 cm progressively
increasing with the diameter of the marker to
b) 35 m where the marker diameter is 80 cm and further
progressively increasing to a maximum of
c) 40 m where the marker diameter is of at least 130 cm.
Where multiple wires, cables, etc. are involved, a marker
should be located not lower than the level of the highest wire
at the point marked.
6.2.10
Recommendation.— A marker should be of one
colour. When installed, white and red, or white and orange
markers should be displayed alternately. The colour selected
should contrast with the background against which it will be
seen.
Use of flags
6.2.11
Flags used to mark objects shall be displayed
around, on top of, or around the highest edge of, the object.
When flags are used to mark extensive objects or groups of
closely spaced objects, they shall be displayed at least every
15 m. Flags shall not increase the hazard presented by the
object they mark.
6.2.12
Flags used to mark fixed objects shall not be less
than 0.6 m square and flags used to mark mobile objects, not
less than 0.9 m square.
6.2.13
Recommendation.— Flags used to mark fixed
objects should be orange in colour or a combination of two
triangular sections, one orange and the other white, or one red
and the other white, except that where such colours merge with
the background, other conspicuous colours should be used.
6.2.14
Flags used to mark mobile objects shall consist of
a chequered pattern, each square having sides of not less than
0.3 m. The colours of the pattern shall contrast each with the
other and with the background against which they will be seen.
Orange and white or alternatively red and white shall be used,
except where such colours merge with the background.
Longest dimension
Greater
than
Not
exceeding
Band width
1.5 m
210 m
1/7 of longest dimension
210 m
270 m
1/9 ’’
’’
’’
270 m
330 m
1/11 ’’
’’
’’
330 m
390 m
1/13 ’’
’’
’’
390 m
450 m
1/15 ’’
’’
’’
450 m
510 m
1/17 ’’
’’
’’
510 m
570 m
1/19 ’’
’’
’’
570 m
630 m
1/21 ’’
’’
’’
Annex 14 — Aerodromes
Volume I
25/11/04
6-4
Figure 6-2.
Examples of marking and lighting of tall structures
A
A
’
C
B
H
See 6.3.12
H
A Roof top pattern
A Plain roof pattern
B Curved surface
C Skeleton structure
’
Note.— H is less the 45 m for the examples shown above.
For greater heights intermediate lights must be added as shown below.
N
1
N
2
Y
X
Light spacing (X) in accordance with Appendix 6
Number of levels of lights = N = Y (metres)
X (metres)
Chapter 6
Annex 14 — Aerodromes
6-5
25/11/04
6.3
Lighting of objects
Use of obstacle lights
6.3.1 The presence of objects which must be lighted, as
specified in 6.1, shall be indicated by low-, medium- or
high-intensity obstacle lights, or a combination of such lights.
Note.— High-intensity obstacle lights are intended for day
use as well as night use. Care is needed to ensure that these
lights do not create disconcerting dazzle. Guidance on the
design, location and operation of high-intensity obstacle lights
is given in the Aerodrome Design Manual, Part 4.
6.3.2
Recommendation.— Low-intensity obstacle lights,
Type A or B, should be used where the object is a less
extensive one and its height above the surrounding ground is
less than 45 m.
6.3.3
Recommendation.— Where the use of low-intensity
obstacle lights, Type A or B, would be inadequate or an early
special warning is required, then medium- or high-intensity
obstacle lights should be used.
6.3.4
Low-intensity obstacle lights, Type C, shall be
displayed on vehicles and other mobile objects excluding
aircraft.
6.3.5
Low-intensity obstacle lights, Type D, shall be
displayed on follow-me vehicles.
6.3.6
Recommendation.— Low-intensity obstacle lights,
Type B, should be used either alone or in combination with
medium-intensity obstacle lights, Type B, in accordance with
6.3.7.
6.3.7
Recommendation.— Medium-intensity obstacle
lights, Type A, B or C, should be used where the object is an
extensive one or its height above the level of the surrounding
ground is greater than 45 m. Medium-intensity obstacle lights,
Types A and C, should be used alone, whereas medium-
intensity obstacle lights, Type B, should be used either alone
or in combination with low-intensity obstacle lights, Type B.
Note.— A group of trees or buildings is regarded as an
extensive object.
6.3.8
Recommendation.— High-intensity obstacle lights,
Type A, should be used to indicate the presence of an object if
its height above the level of the surrounding ground exceeds
150 m and an aeronautical study indicates such lights to be
essential for the recognition of the object by day.
6.3.9
Recommendation.— High-intensity obstacle lights,
Type B, should be used to indicate the presence of a tower
supporting overhead wires, cables, etc., where:
a) an aeronautical study indicates such lights to be
essential for the recognition of the presence of wires,
cables, etc.; or
b) it has not been found practicable to install markers on
the wires, cables, etc.
6.3.10
Recommendation.— Where, in the opinion of the
appropriate authority, the use of high-intensity obstacle lights,
Type A or B, or medium-intensity obstacle lights, Type A, at
night may dazzle pilots in the vicinity of an aerodrome (within
approximately 10 000 m radius) or cause significant
environmental concerns, a dual obstacle lighting system
should be provided. This system should be composed of
high-intensity obstacle lights, Type A or B, or medium-
intensity obstacle lights, Type A, as appropriate, for daytime
and twilight use and medium-intensity obstacle lights, Type B
or C, for night-time use.
Location of obstacle lights
Note.— Recommendations on how a combination of low-,
medium-, and/or high-intensity lights on obstacles should be
displayed are given in Appendix 6.
6.3.11
One or more low-, medium- or high-intensity
obstacle lights shall be located as close as practicable to the
top of the object. The top lights shall be so arranged as to at
least indicate the points or edges of the object highest in
relation to the obstacle limitation surface.
6.3.12
Recommendation.— In the case of chimney or
other structure of like function, the top lights should be placed
sufficiently below the top so as to minimize contamination by
smoke etc. (see Figures 6-2 and 6-3).
6.3.13
In the case of a tower or antenna structure
indicated by high-intensity obstacle lights by day with an
appurtenance, such as a rod or an antenna, greater than 12 m
where it is not practicable to locate a high-intensity obstacle
light on the top of the appurtenance, such a light shall be
located at the highest practicable point and, if practicable, a
medium-intensity obstacle light, Type A, mounted on the top.
6.3.14
In the case of an extensive object or of a group of
closely spaced objects, top lights shall be displayed at least on
the points or edges of the objects highest in relation to the
obstacle limitation surface, so as to indicate the general
definition and the extent of the objects. If two or more edges
are of the same height, the edge nearest the landing area shall
be marked. Where low-intensity lights are used, they shall be
spaced at longitudinal intervals not exceeding 45 m. Where
medium-intensity lights are used, they shall be spaced at
longitudinal intervals not exceeding 900 m.
6.3.15
Recommendation.— When the obstacle limitation
surface concerned is sloping and the highest point above the
Annex 14 — Aerodromes
Volume I
25/11/04
6-6
obstacle limitation surface is not the highest point of the
object, additional obstacle lights should be placed on the
highest point of the object.
6.3.16
Where an object is indicated by medium-intensity
obstacle lights, Type A, and the top of the object is more than
105 m above the level of the surrounding ground or the
elevation of tops of nearby buildings (when the object to be
marked is surrounded by buildings), additional lights shall be
provided at intermediate levels. These additional intermediate
lights shall be spaced as equally as practicable, between the
top lights and ground level or the level of tops of nearby
buildings, as appropriate, with the spacing not exceeding
105 m (see 6.3.7).
6.3.17
Where an object is indicated by medium-intensity
obstacle lights, Type B, and the top of the object is more than
45 m above the level of the surrounding ground or the
elevation of tops of nearby buildings (when the object to be
marked is surrounded by buildings), additional lights shall be
provided at intermediate levels. These additional intermediate
lights shall be alternately low-intensity obstacle lights, Type B,
and medium-intensity obstacle lights, Type B, and shall be
spaced as equally as practicable between the top lights and
ground level or the level of tops of nearby buildings, as
appropriate, with the spacing not exceeding 52 m.
6.3.18
Where an object is indicated by medium-intensity
obstacle lights, Type C, and the top of the object is more than
45 m above the level of the surrounding ground or the
elevation of tops of nearby buildings (when the object to be
marked is surrounded by buildings), additional lights shall be
provided at intermediate levels. These additional intermediate
lights shall be spaced as equally as practicable, between the
top lights and ground level or the level of tops of nearby
buildings, as appropriate, with the spacing not exceeding 52 m.
6.3.19
Where high-intensity obstacle lights, Type A, are
used, they shall be spaced at uniform intervals not exceeding
105 m between the ground level and the top light(s) specified
in 6.3.11 except that where an object to be marked is
surrounded by buildings, the elevation of the tops of the
buildings may be used as the equivalent of the ground level
when determining the number of light levels.
6.3.20
Where high-intensity obstacle lights, Type B, are
used, they shall be located at three levels:
—
at the top of the tower;
—
at the lowest level of the catenary of the wires or cables;
and
—
at approximately midway between these two levels.
Note.— In some cases, this may require locating the lights
off the tower.
6.3.21
Recommendation.— The installation setting angles
for high-intensity obstacle lights, Types A and B, should be in
accordance with Table 6-2.
6.3.22
The number and arrangement of low-, medium- or
high-intensity obstacle lights at each level to be marked shall
be such that the object is indicated from every angle in
azimuth. Where a light is shielded in any direction by another
part of the object, or by an adjacent object, additional lights
shall be provided on that object in such a way as to retain the
Figure 6-3.
Lighting of buildings
A
E
A
B
C
D
A, B = 45m - 90m
C, D, E, <45m
Chapter 6
Annex 14 — Aerodromes
6-7
25/11/04
general definition of the object to be lighted. If the shielded
light does not contribute to the definition of the object to be
lighted, it may be omitted.
Table 6-2.
Installation setting angles for
high-intensity obstacle lights
Low-intensity obstacle light — Characteristics
6.3.23
Low-intensity obstacle lights on fixed objects,
Types A and B, shall be fixed-red lights.
6.3.24
Low-intensity obstacle lights, Types A and B, shall
be in accordance with the specifications in Table 6-3.
6.3.25
Low-intensity obstacle lights, Type C, displayed
on vehicles associated with emergency or security shall be
flashing-blue and those displayed on other vehicles shall be
flashing-yellow.
6.3.26
Low-intensity obstacle lights, Type D, displayed
on follow-me vehicles shall be flashing-yellow.
6.3.27
Low-intensity obstacle lights, Types C and D, shall
be in accordance with the specifications in Table 6-3.
6.3.28
Low-intensity obstacle lights on objects with
limited mobility such as aerobridges shall be fixed-red. The
intensity of the lights shall be sufficient to ensure conspicuity
considering the intensity of the adjacent lights and the general
levels of illumination against which they would normally be
viewed.
Note.— See Annex 2 for lights to be displayed by aircraft.
6.3.29
Low-intensity obstacle lights on objects with
limited mobility shall as a minimum be in accordance with the
specifications for low-intensity obstacle lights, Type A, in
Table 6-3.
Medium-intensity obstacle light — Characteristics
6.3.30
Medium-intensity obstacle lights, Type A, shall be
flashing-white lights, Type B shall be flashing-red lights and
Type C shall be fixed-red lights.
6.3.31
Medium-intensity obstacle lights, Types A, B and
C, shall be in accordance with the specifications in Table 6-3.
6.3.32
Medium-intensity obstacle lights, Types A and B,
located on an object shall flash simultaneously.
High-intensity obstacle light — Characteristics
6.3.33
High-intensity obstacle lights, Types A and B,
shall be flashing-white lights.
6.3.34
High-intensity obstacle lights, Types A and B,
shall be in accordance with the specifications in Table 6-3.
6.3.35
High-intensity obstacle lights, Type A, located on
an object shall flash simultaneously.
6.3.36
Recommendation.—
High-intensity obstacle
lights, Type B, indicating the presence of a tower supporting
overhead wires, cables, etc., should flash sequentially; first the
middle light, second the top light and last, the bottom light.
The intervals between flashes of the lights should approximate
the following ratios:
Flash interval between
Ratio of cycle time
middle and top light
1/13
top and bottom light
2/13
bottom and middle light
10/13.
Height of light unit
above terrain
Angle of the peak
of the beam above
the horizontal
greater than 151 m AGL
0°
122 m to 151 m AGL
1°
92 m to 122 m AGL
2°
less than 92 m AGL
3°
Annex 14 — Aerodromes
Volume I
25/11/04
6-8
T
ab
le 6
-3
.
Ch
ar
acteristics o
f o
b
st
ac
le
lig
h
ts
12
3
4
5
6
7
8
9
1
0
1
1
1
2
Li
gh
t T
ype
Co
lo
ur
S
igna
l t
y
pe/
(f
las
h
r
a
te
)
Pe
ak
i
n
te
ns
it
y
(c
d
) a
t gi
ve
n B
ack
gr
ou
n
d
Lu
min
a
n
ce
V
e
rt
ical
Be
a
m
Spr
e
ad
(c
)
In
te
ns
it
y (
c
d)
at
gi
ve
n El
e
v
at
io
n
A
n
g
le
s
wh
e
n
th
e
l
ig
h
t u
n
it
is
le
v
elle
d
(d
)
Ab
o
v
e
50
0 cd
/m
2
5
0
-500
cd
/m
2
Be
low
50
cd/
m
2
–1
0°
(e
)
–
1
° (
f)
±
0°
(f)
+
6
°
+
10
°
L
o
w
-in
te
n
sit
y,
T
y
p
e A
(f
ix
ed o
b
st
acl
e
)
Re
d
F
ix
e
d
N/A
1
0
mn
m
1
0
mn
m
1
0
°
—
—
—
1
0
mn
m
(g
)
10
m
n
m
(g
)
L
o
w
-i
n
te
n
sit
y,
T
y
p
e B
(f
ix
ed o
b
st
acl
e
)
Re
d
F
ix
e
d
N/A
3
2
mn
m
3
2
mn
m
1
0
°
—
—
—
3
2
mn
m
(g
)
32
m
n
m
(g
)
L
o
w
-i
n
te
n
sit
y,
T
y
p
e C
(m
o
b
ile
o
b
st
a
cle
)
Y
ello
w/Blu
e
(a
)
Fl
as
hi
ng
(6
0-
90 f
p
m
)
N/A
4
0
mn
m (b
)
40
0 m
ax
4
0
mn
m (
b
)
40
0 m
a
x
12°
(h
)
—
—
—
—
—
L
o
w
-in
te
n
sit
y,
T
y
p
e D
Fo
ll
o
w
-m
e V
e
hi
cl
e
Y
el
low
Fl
as
hi
ng
(6
0-
90 f
p
m
)
N/A
2
0
0
mn
m (
b
)
40
0 m
ax
20
0 m
n
m
(b
)
40
0 m
a
x
12°
(i
)
—
—
—
—
—
Me
di
um
-i
nt
en
si
ty
,
Ty
p
e
A
W
h
it
e
F
la
sh
in
g
(2
0-
60 f
p
m
)
2
0
000
(
b
)
±
25%
2
0
00
0 (
b
)
±
25
%
2
0
00
(b
)
±
25
%
3
° mn
m
3
% ma
x
5
0
%
mn
m
75
%
m
ax
10
0%
m
n
m
—
—
Me
di
um
-i
nt
en
si
ty
,
Ty
p
e
B
R
e
d
F
la
sh
in
g
(2
0-
60 f
p
m
)
N
/A
N
/A
2
0
00
(b
)
±
25
%
3
° mn
m
—
5
0
% mn
m
75
%
m
ax
10
0%
m
n
m
—
—
Me
di
um
-i
nt
en
si
ty
,
Ty
p
e
C
Re
d
F
ix
e
d
N/A
N
/A
2
0
0
0
(
b
)
±
25
%
3
° mn
m
—
5
0
% mn
m
75
%
m
ax
10
0%
m
n
m
—
—
H
igh
-i
nt
e
n
si
ty
,
Ty
p
e
A
W
h
it
e
F
la
sh
in
g
(4
0-
60 f
p
m
)
2
0
0
0
00
(b
)
±
25%
2
0
00
0 (
b
)
±
25
%
2
0
00
(b
)
±
25
%
3°
-7
°
3
% ma
x
5
0
%
mnm
75
%
m
ax
10
0%
m
n
m
—
—
H
igh
-i
nt
e
n
si
ty
,
Ty
p
e
B
W
h
it
e
F
la
sh
in
g
(4
0-
60 f
p
m
)
1
0
0
0
00
(b
)
±
25%
2
0
00
0 (
b
)
±
25
%
2 00
0 (
b
)
±
25
%
3°
-7
°
3
% ma
x
5
0
%
mnm
75
%
m
ax
10
0%
m
n
m
—
—
No
te
.—
T
h
is
t
abl
e
d
o
es
not
i
n
cl
ud
e r
ec
o
m
m
e
nd
ed
h
o
ri
zo
n
ta
l be
am
s
p
re
a
d
s.
6.
3
.2
2
r
equ
ir
es
3
60°
c
o
v
er
age
a
rou
nd an
o
b
st
acl
e
. Th
er
efo
re
, th
e
n
u
mb
er
o
f
li
g
h
ts n
ee
d
ed
to
m
e
et
t
h
is
r
eq
u
ir
em
e
n
t wi
ll
de
pen
d
on
t
h
e ho
ri
zont
a
l be
am
s
p
re
ads
of
eac
h
l
ight
as
wel
l
a
s t
h
e
s
h
a
p
e
of
t
h
e ob
st
ac
le
.
T
h
u
s,
wi
th
n
a
rr
owe
r b
eam
s
p
re
ads
, m
o
re
l
ight
s
w
il
l be
re
qui
re
d.
a
)
S
ee
6.
3.
25
b
)
E
ff
e
ctiv
e
i
n
te
n
si
ty
, a
s d
e
te
rmin
ed
in
a
cc
o
rd
a
n
c
e with
th
e
Aer
o
dr
om
e D
e
si
gn
M
a
n
ual
, P
a
rt
4
.
c
)
Be
am
s
p
re
a
d
i
s de
fi
ne
d as
t
h
e an
gl
e be
tw
ee
n t
w
o di
re
ct
io
n
s i
n
a pl
an
e f
o
r
w
h
ic
h t
h
e
i
n
te
ns
it
y i
s e
qua
l
to
5
0
%
of
t
h
e l
o
w
er
t
o
le
ra
n
c
e v
a
lu
e o
f th
e in
te
n
sity
s
h
o
w
n
i
n
c
o
lu
mn
s
4
, 5
an
d
6
. Th
e b
eam
pat
te
rn
i
s
not
ne
ce
ss
ar
il
y
sy
m
m
et
ri
c
al
ab
ou
t t
h
e
el
e
v
at
io
n
ang
le at
w
h
ic
h t
h
e
pe
ak
i
n
te
ns
it
y
oc
cur
s.
d)
El
ev
at
io
n (
v
er
ti
ca
l)
an
gl
es
ar
e r
e
fe
re
n
c
ed
t
o
t
h
e ho
ri
zo
nt
al
.
e
)
In
te
n
sity
a
t a
n
y
sp
e
cif
ie
d
h
o
ri
zo
n
ta
l ra
d
ia
l a
s a
p
erc
e
n
ta
g
e o
f th
e a
ctu
a
l p
ea
k
in
te
n
sity
a
t th
e sa
me
r
a
d
ia
l wh
en
o
p
e
ra
te
d
a
t e
ac
h
o
f t
h
e in
te
n
siti
e
s sh
o
w
n
in
c
o
lu
mn
s 4
, 5
an
d 6
.
f)
In
te
n
sity
a
t a
n
y
s
p
ec
ifi
e
d
h
o
ri
z
o
n
ta
l r
a
d
ia
l a
s a
p
erc
e
n
ta
g
e o
f th
e
l
o
we
r to
le
ra
n
ce
v
alu
e o
f th
e
i
n
te
n
sit
y
s
h
o
w
n
i
n
c
o
lu
mn
s 4
, 5 a
n
d
6.
g
)
In
a
d
d
itio
n
to
s
p
ec
ifi
e
d
v
alu
e
s, li
g
h
ts
sh
a
ll
h
av
e su
ff
ic
ie
n
t in
te
n
si
ty
to
e
n
su
re
c
o
n
sp
ic
u
ity
a
t e
le
v
a
tio
n
a
n
g
le
s b
e
tw
e
en
±
0
° a
n
d
50
°.
h
)
P
ea
k
i
n
te
n
si
ty
s
hou
ld
be
l
o
ca
te
d a
t
app
ro
x
im
at
e
ly
2.
5°
ver
ti
c
al
.
i)
P
ea
k
in
te
n
sity
sh
o
u
ld
b
e
l
o
ca
te
d
a
t
ap
p
ro
x
ima
te
ly
1
7
° v
e
rtic
a
l.
fp
m
—
fla
sh
es p
e
r m
in
u
te
; N/A —
n
o
t a
p
p
lic
a
b
le
ANNEX 14 — VOLUME I
APP 6-1
25/11/04
APPENDIX 6.
LOCATION OF LIGHTS ON OBSTACLES
Note.— High-intensity obstacle lighting is recommended on structures with a height of more than 150 m above ground level.
If medium-intensity lighting is used, marking will also be required.
Figure A6-1.
Medium-intensity flashing-white obstacle lighting system, Type A
0
45 m
105 m
210 m
315 m
420 m
525 m
630 m
630 m
600 m
550 m
500 m
450 m
400 m
350 m
300 m
250 m
200 m
150 m
100 m
50 m
0
1/6
1/3
1/2
1/2
1/2
5/6
2/3
1/5
2/5
3/5
4/5
1/4
3/4
2/3
1/3
Medium-intensity obstacle light Type A
Height
of
lights
o
n
structure
in
metres
above
ground
level
Height of structure in metres above ground level
To
p
of
to
ta
l s
tru
ct
ur
e
in
cl
ud
in
g
ap
pu
rte
na
nc
e
Annex 14 — Aerodromes
Volume I
25/11/04
APP 6-2
Note.— For night-time use only.
Figure A6-2.
Medium-intensity flashing-red obstacle lighting system, Type B
0
45 m
105 m
210 m
315 m
420 m
525 m
630 m
630 m
600 m
550 m
500 m
450 m
400 m
350 m
300 m
250 m
200 m
150 m
100 m
50 m
0
1/6
1/3
1/2
1/2
1/2
1/2
5/6
2/3
1/5
2/5
3/5
4/5
1/4
3/4
2/3
1/3
Medium-intensity obstacle light Type B
Low-intensity obstacle light Type B
Height
of
lights
on
structure
in
metres
above
g
round
level
Height of structure in metres above ground level
1/12
1/4
5/12
7/12
3/4
11/12
9/10
7/10
1/2
3/10
1/10
1/8
3/8
5/8
7/8
1/6
1/2
5/6
3/4
1/4
To
p
of
to
ta
l s
tru
ct
ur
e
in
cl
ud
in
g
ap
pu
rte
na
nc
e
Appendix 6
Annex 14 — Aerodromes
APP 6-3
25/11/04
Note.— For night-time use only.
Figure A6-3.
Medium-intensity fixed-red obstacle lighting system, Type C
0
45 m
105 m
210 m
315 m
420 m
525 m
630 m
630 m
600 m
550 m
500 m
450 m
400 m
350 m
300 m
250 m
200 m
150 m
100 m
50 m
0
1/6
1/3
1/2
1/2
1/2
1/2
5/6
2/3
1/5
2/5
3/5
4/5
1/4
3/4
2/3
1/3
Medium-intensity obstacle light Type C
Height
of
lights
on
structure
in
metres
above
g
round
level
Height of structure in metres above ground level
1/12
1/4
5/12
7/12
3/4
11
/1
2
9/10
7/10
1/2
3/10
1/10
1/8
3/8
5/8
7/8
1/6
1/2
5/6
3/4
1/4
To
p
of
to
ta
l s
tru
ct
ur
e
in
cl
ud
in
g
ap
pu
rte
na
nc
e
Annex 14 — Aerodromes
Volume I
25/11/04
APP 6-4
Note.— High-intensity obstacle lighting is recommended on structures with a height of more than 150 m above ground level.
If medium-intensity lighting is used, marking will also be required.
Figure A6-4.
Medium-intensity dual obstacle lighting system, Type A/Type B
0
0
45 m
105 m
210 m
315 m
420 m
525 m
630 m
1/6
1/3
1/2
1/2
1/2
1/2
5/6
2/3
1/5
2/5
3/5
4/5
1/4
3/4
2/3
1/3
Medium-intensity obstacle light
Type B
< 50 cd/m
Type A
> 50 cd/m
Low-intensity obstacle light
Type B
< 50 cd/m
Height
of
lights
on
structure
in
metres
above
g
round
level
Height of structure in metres above ground level
1/12
1/4
5/12
7/12
3/4
11
/12
9/10
7/10
1/2
3/10
1/10
1/8
3/8
5/8
7/8
1/6
1/2
5/6
3/4
1/4
630 m
600 m
550 m
500 m
450 m
400 m
350 m
300 m
250 m
200 m
150 m
100 m
50 m
2
2
2
To
p
of
to
ta
l s
tru
ct
ur
e
in
cl
ud
in
g
ap
pu
rte
na
nc
e
Appendix 6
Annex 14 — Aerodromes
APP 6-5
25/11/04
Note.— High-intensity obstacle lighting is recommended on structures with a height of more than 150 m above ground level.
If medium-intensity lighting is used, marking will also be required.
Figure A6-5.
Medium-intensity dual obstacle lighting system, Type A/Type C
0
0
45 m
105 m
210 m
315 m
420 m
525 m
630 m
1/6
1/3
1/2
1/2
1/2
1/2
5/6
2/3
1/5
2/5
3/5
4/5
1/4
3/4
2/3
1/3
Medium-intensity obstacle light
Type C
< 50 cd/m
Type A
> 50 cd/m
Medium-intensity obstacle light
Type C
< 50 cd/m
Height
of
lights
on
structure
in
metres
above
g
round
level
Height of structure in metres above ground level
1/12
1/4
5/12
7/12
3/4
11
/12
9/10
7/10
1/2
3/10
1/10
1/8
3/8
5/8
7/8
1/6
1/2
5/6
3/4
1/4
50 m
100 m
150 m
200 m
250 m
300 m
350 m
400 m
450 m
500 m
550 m
600 m
630 m
To
p
of
to
ta
l s
tru
ct
ur
e
in
cl
ud
in
g
ap
pu
rte
na
nc
e
2
2
2
Annex 14 — Aerodromes
Volume I
25/11/04
APP 6-6
Figure A6-6.
High-intensity flashing-white obstacle lighting system, Type A
0
150 m
210 m
315 m
420 m
525 m
630 m
630 m
600 m
550 m
500 m
450 m
400 m
350 m
300 m
250 m
200 m
150 m
100 m
50 m
0
1/6
1/3
1/2
1/2
1/2
5/6
2/3
1/5
2/5
3/5
4/5
1/4
3/4
2/3
1/3
Height
of
lights
on
structure
in
metres
above
g
round
level
Height of structure in metres above ground level
High-intensity obstacle light Type A
To
p
of
m
ai
n
st
ru
ct
ur
e
Appendix 6
Annex 14 — Aerodromes
APP 6-7
25/11/04
Figure A6-7.
High-/medium-intensity dual obstacle lighting system, Type A/Type B
0
150 m
210 m
315 m
420 m
525 m
630 m
630 m
600 m
550 m
500 m
450 m
400 m
350 m
300 m
250 m
200 m
150 m
100 m
50 m
0
1/6
1/3
1/2
1/2
1/2
5/6
2/3
1/5
2/5
3/5
4/5
1/4
3/4
2/3
1/3
Medium-intensity obstacle light
Type B
< 50 cd/m
Type A
> 50 cd/m
Low-intensity obstacle light
Type B
< 50 cd/m
Height
of
lights
on
structure
in
metres
above
g
round
level
Height of structure in metres above ground level
1/12
1/4
5/12
7/12
3/4
11
/12
9/10
7/10
1/2
3/10
1/10
1/8
3/8
5/8
7/8
1/6
1/2
5/6
3/4
1/4
Antenna light appurtenance exceeding
12 m above structure
High-intensity obstacle light
Type A > 50 cd/m and
Medium-intensity obstacle light Type B < 50 c d/m
To
p
of
m
ai
n
st
ru
ct
ur
e
2
2
2
2
2
Annex 14 — Aerodromes
Volume I
25/11/04
APP 6-8
Figure A6-8.
High-/medium-intensity dual obstacle lighting system, Type A/Type C
0
150 m
210 m
315 m
420 m
525 m
630 m
630 m
600 m
550 m
500 m
450 m
400 m
350 m
300 m
250 m
200 m
150 m
100 m
50 m
0
1/6
1/3
1/2
1/2
1/2
5/6
2/3
1/5
2/5
3/5
4/5
1/4
3/4
2/3
1/3
Medium-intensity obstacle light
Type C
< 50 cd/m
Type A
> 50 cd/m
Medium-intensity obstacle light
Type C
< 50 cd/m
Height
of
lights
o
n
structure
in
metres
above
ground
level
Height of structure in metres above ground level
1/12
1/4
5/12
7/12
3/4
11
/12
9/10
7/10
1/2
3/10
1/10
1/8
3/8
5/8
7/8
1/6
1/2
5/6
3/4
1/4
Antenna light appurtenance exceeding
12 m above structure
High-intensity
Type A > 50 cd/m and
Medium-intensity obstacle light Type C < 50 c d/m
obstacle light
To
p
of
m
ai
n
st
ru
ct
ur
e
2
2
2
2
2