Cool Clean Technologies specializes in CO2 technology innovations for improving manufacturing processes. CO2 cleaning is a non-abrasive, waterless cleaning solution used by industries to replace aqueous and solvent based cleaning operations. CO2 cleaning uses solid and liquid phase carbon dioxide for cleaning, surface preparation, and particle removal. Dry ice blasting is used for more abrasive applications. Capable of solving the most difficult cleaning challenges, dry ice blasting focuses a spray of dry ice pellets at the trouble areas, removing contamination such as greases, heavy oils, glues, food residues, and even paint. Machining using CO2 cooling enables the tool to remain at near ambient temperature, which increases tool life and cutting speeds compared to MQL and dry processes. CO2 extraction technology is improving the way oils are extracted from outgassing, botanical, and silicone applications. CO2 extraction effectively extracts oils without added solvents making the process more human friendly. See below the key applications of CO2 technology and how it is giving manufacturers an advantage over traditional methods:
Surface Preparation
Surface Preparation
Automated and waterless CO2 cleaning solutions for the automotive industry improve surface finish prior to painting, hard coating, and varnishing.
CO2 Extraction
CO2 Extraction
Supercritical and Dense Phase CO2 extraction equipment for botanical materials, silicone removal, and elastomer outgassing applications.
Dry Ice Cleaning
Dry Ice Cleaning
Portable, versatile, powerful, yet quiet dry ice cleaning solutions to remove the most difficult contaminants. Ask about our onsite demo program!
Plastic Deburring
Plastic Deburring
CO2 blasting cleans and removes burrs from various plastics (PEEK, nylon, etc.) and composites. Deburring is automated to improve efficiency.
Automotive
Automotive
Automated CO2 cleaning for critical parts prior to inspection. Quick residue removal of debris, mold release agents, fingerprints, and oils.
Aerospace
Aerospace
Aerospace drilling of CFRP & Ti stackups using CO2 cooling provides an essentially dry process with faster drilling speeds and less tool wear.
Medical
Medical
Medical device manufacturers use CO2 blasting for deburring and cleaning. Liquid CO2 solutions clean various porous implants and complex devices.
Electronics/HDD
Electronics/HDD
Precision CO2 cleaning and solder flux removal for Electronics, PCB, and HDD applications. Capable of removing particles down to the 0.3 micron level.
Optics & Display
Optics & Display
Residue free CO2 cleaning is used to remove particulate, light oils, fingerprints, and dust from optics, lens, optical components, and displays.
Where is Cool Clean next?? Cool Clean Technologies is back in Minnesota for ATX Minneapolis! The event takes place in Minneapolis, MN on October 31st – November 1st. Check out our Booth #1116 and see our NEW dry ice blasting solutions and much more! Don’t miss out and contact us for a personal invite to attend the exhibition for FREE!