|
TIG Handbook
This all inclusive study of TIG fundamentals is available as a multi-chapter PDF download. Bound publications are available for $25.00 and can be ordered in the Resources for Sale section.
Chapter I. - The GTAW (TIG) Process
Introduction to the TIG process. Process description, advantages and disadvantages.
|
Download Chapter I
(0.13 MB, 0 min 19 sec at 56kb/s) |
Chapter II. - GTAW Fundamentals
Descriptions of current and voltage, polarity, waveform control, fluxes used, and types of TIG arc starts.
|
Download Chapter II
(0.99 MB, 2 min 28 sec at 56kb/s) |
Chapter III. - GTAW Equipment
Safety, selecting a power source, types of power sources, torches, and automated TIG welding.
|
Download Chapter III
(1.1 MB, 2 min 40 sec at 56kb/s) |
Chapter IV. - Electrodes and Consumables
Tungsten electrode types and usage, shielding gases and usage, and types of filler metals and their specifications.
|
Download Chapter IV
(0.76 MB, 1 min 55 sec at 56kb/s) |
Chapter V. - Safety
Causes of electrical shock, avoiding welding fumes, and proper clothing and eye protection.
|
Download Chapter V
(0.39 MB, 0 min 59 sec at 56kb/s) |
Chapter VI. - Preparation for Welding
How to set the power source controls, preparing the weld joint, and metal types.
|
Download Chapter VI
(0.28 MB, 0 min 43 sec at 56kb/s) |
Chapter VII. - Joint Design and Types of Welds
Weld metal configurations, and types of welds.
|
Download Chapter VII
(0.39 MB, 0 min 58 sec at 56kb/s) |
Chapter VIII. - Techniques for Basic Weld Joints
Manual torch techniques for making proper welds, and arc starting procedures.
|
Download Chapter VIII
(0.62 MB, 1 min 33 sec at 56kb/s) |
Chapter IX. - Cost Considerations of the GTAW Process
Formulas to figure total welding costs.
|
Download Chapter IX
(0.08 MB, 0 min 12 sec at 56kb/s) |
Chapter X. - GTAW Troubleshooting
Welding process and equipment problems, with probable causes and suggested remedies.
|
Download Chapter X
(0.08 MB, 0 min 12 sec at 56kb/s) |
Chapter XI. - Tables
Electrode types, polarity recommendations, filler metal specs, cost information, and conversion figures.
|
Download Chapter XI
(0.14 MB, 0 min 22 sec at 56kb/s) |
Chapter XII. - Glossary
Definitions, from Advanced Squarewave to Zirconiated Tungsten.
|
Download Chapter XII
(1.1 MB, 2 min 40 sec at 56kb/s) |
Back to Top
WARNING:
This document contains general information about the topics discussed herein. This document is not an application manual and
does not contain a complete statement of all factors pertaining to those topics. The installation, operation, and maintenance of
arc welding equipment and the employment of procedures described in this document should be conducted only by qualified
persons in accordance with applicable codes, safe practices, and by manufacturer's instructions. Always be certain that work
areas are clean and safe and that proper ventilation is used. Misuse of equipment, and failure to observe applicable codes and
safe practices, can result in serious personal injury and property damage
|