|
Air Flow Calculation
One of the most important factors in air filtration is the determination of the right size filter for the engine. Each filter is designed for a certain air flow. Adapting any filter to an engine requires a consideration of the air flow required by the engine as well as the resistance of the filter and ducting.
The engine manufacturer should specify the technical information required for this air consumption (CFM).
When we don’t have the airflow numbers, we can use the general rule of 2.5 times the horsepower of the engine to get an approximate amount of air required.
If we want to calculate the CFM (Cubic Feet per Minute) for a 4 cycle motor we can multiply the cubic inch displacement of the engine by the maximum rpm (Revolutions Per Minute) and divide the result by 3456. Then we multiply the results by the volumetric efficiency of the motor.
The volumetric efficiency is a factor determined by the efficiency of the turbo, the electronic control systems, the type of fuel injection and the variation of valve timing or opening.
A carburated engine normally has a volumetric efficiency of 0.70 to 0.80, but the electronics can raise this figure as high as 2.0.
A diesel engine (2 cycle or 4 cycle) normally has a volumetric efficiency of 0.90.
A turbo can raise the volumetric efficiency to between 1.5 and 3.0. If you don’t know this value for your turbo, it is best to use 3.0.
To simplify the calculation, we developed this calculator.
To use it:
- Select the measurement you would like: Cubic Centimeters (ex: 2400) or Cubic Inches (ex: 289)
- Enter the maximum velocity (RPM) you expect from your engine (ex: 4000)
- Select the type of engine between the four options, or select “Enter a specific value” and enter the volumetric efficiency that you would like to use (ex: 2.8). When you select one of the four engine types, the maximum values will be used.
- The results will be shown in CFM and Liters per Minute.
Other Tools in English
Calculate the viscosity of any oil at a specific operating temperature
Graph any four oils from their data sheets.
Table of API Gravity-Specific Gravity-weight per gallon or liter
Calculator for conversion of API Gravity, Specific Gravity, pounds per gallon or kilos per liter
SAE-ISO-AGMA comparison chart
SAE J300 Motor Oil Viscosity Chart
SAE J306 Automotive Gear Oil Viscosity Chart
Calculate the air flow requirement for your engine
Selection of the Right Motor Oil for Corvairs and other Flat Tappet Engines
Detailed progress reports and pictures of the restoration of a 1960 Chevrolet Corvair
|
